
What Size Split System Do I Need for My Melbourne Room? A Room by Room Sizing Guide from Beyond Heating and Cooling
What size split system do I need? For most Melbourne rooms, a manufacturer rule of thumb puts it at 1 to 1.5 kilowatts (kW) of capacity for every 10 square metres of floor area, based on a standard 2.4 metre ceiling. That means a 20 square metre bedroom usually lands somewhere between 2.0 and 3.0 kW. Ceiling height, insulation, windows and the way the room faces can push that figure up or down.
This guide shows you how to measure a room, how to read the sizing bands, and which features of a Melbourne home change the answer. It also explains when a multi-head split system or a ducted system makes more sense than a row of separate wall units. If you are sizing a whole-home ducted system instead, our guide on how to size a ducted heating system for your Melbourne home covers that in detail.
Key Takeaways
- Measure the length and width of the room and multiply them to get the floor area in square metres.
- Allow roughly 1 to 1.5 kW for every 10 square metres when the ceiling is the standard 2.4 metres.
- Add about 10% for 2.7 metre ceilings and about 20% for 3 metre ceilings.
- A split system that is too small runs hard and struggles, and one that is too big costs more to buy and wastes energy.
- An in-home assessment checks the windows, insulation and orientation that an online calculator cannot see.

What Size Split System Do I Need for My Room?
In its guide Split System A/C: What Size Do You Need?, Midea Australia gives a rule of thumb of 1 to 1.5 kW for every 10 square metres of floor area. A 20 square metre room would need a split system of about 2.0 to 3.0 kW. Those figures assume a standard 2.4 metre ceiling.
Midea groups the answer into three room size bands.
| Room type | Room area | Split system size |
|---|---|---|
| Small bedroom or study | Up to 20 m² | 2.0 to 2.5 kW |
| Medium bedroom or small lounge room | 20 to 40 m² | 2.5 to 5.0 kW |
| Large bedroom, open-plan living area, lounge room or kitchen | 40 to 60 m² | 5.0 to 9.0 kW |
Treat the table as a starting point for a conversation, not a final answer. The Australian Government’s Your Home guide on heating and cooling suggests using an online calculator or getting quotes from air conditioning installers so the system is correctly sized for the space.
How Do I Measure My Room for a Split System?
Measure the length and the width of the room in metres, then multiply the two numbers to get the floor area in square metres. Midea’s guide gives the same first step.
Plenty of rooms are not perfect rectangles, so a few extra steps help:
- L-shaped rooms: split the room into two rectangles, work out each area and add them together.
- Open-plan living: include the kitchen and dining area if they share the same open space, because the split system will be heating and cooling all of it.
- Ceiling height: measure it too, because rooms with ceilings above 2.4 metres need a split system with more capacity.
Here are two worked examples using Midea’s rule of thumb. A 4 metre by 5 metre bedroom is 20 square metres, which points to a split system of roughly 2.0 to 3.0 kW. A 6 metre by 7 metre open-plan living and dining area is 42 square metres, which points to roughly 4.2 to 6.3 kW before you look at the ceiling, the windows or the insulation.
How Does Ceiling Height Change the Split System Size I Need?
Midea’s guide says the capacity should be roughly 10% larger for a room with 2.7 metre ceilings and roughly 20% larger for a room with 3 metre ceilings. A taller room holds more air, so the split system has to move more heat to keep the room at the temperature you set.
This is worth checking if your home has high ceilings or a raked ceiling over the living area. Take a 30 square metre lounge room as an example. With a 2.4 metre ceiling, the rule of thumb suggests about 3.0 to 4.5 kW. With 3 metre ceilings, adding 20% brings that to about 3.6 to 5.4 kW, which can mean moving up a size of indoor unit.
What Else Changes the Split System Size for a Melbourne Home?
Daikin Australia’s sizing FAQ, How do I choose the right size air conditioner for my home?, says the right size depends on many factors, such as room orientation, window size and ceiling insulation. Two rooms with the same floor area can need different split systems because of those details.
Insulation in the Ceiling and Walls
A well-insulated room holds its warmth in winter and its cool air in summer, so the split system does not have to work as hard. A poorly insulated room lets that air escape, and Midea notes that it makes the system work much harder to keep the room comfortable. If your ceiling insulation is thin or missing, expect the right size to sit towards the top of the band.
Windows and Glazing
Large windows or several windows add heat to a room in summer and let it escape in winter. Midea points out that single-glazed windows insulate less than double-glazed windows. Curtains, blinds and external awnings help reduce the effect, so it is worth mentioning them when someone sizes the room.
Which Way the Room Faces
Midea’s guide notes that windows facing east or west may receive more direct sunlight, and that rooms which take more afternoon sun in summer will always be warmer. A west-facing bedroom that takes the afternoon sun in January is a different room to size than a shaded bedroom on the south side of the same house. Rooms with more external walls can also swing in temperature more than rooms in the middle of the home.
Heating on Cold Melbourne Mornings
A reverse cycle split system heats as well as cools, so it may end up as the main heater for the room through a Melbourne winter. Non-ducted air conditioners in Australia carry a Zoned Energy Rating Label, which energy.gov.au explains shows the efficiency for heating and for cooling across three climate zones: hot, average and cold. When you compare models, check the heating figures on that label as well as the cooling figures.

What Happens If My Split System Is the Wrong Size?
The Your Home guide says that a system which is too large costs more to buy and wastes energy and money to run, and a system which is too small has to run harder and uses more energy to hold the temperature. Either way, you pay more over the life of the split system than you would with the right size.
An undersized split system is easy to notice. It runs flat out on a hot afternoon or a frosty morning and still cannot reach the temperature you set. Midea’s guide adds that an oversized unit cycles on and off too quickly, which wastes energy and can leave the room with uneven temperatures. Bigger is not automatically better, which is why it pays to size the room properly before you choose a model.
Can I Use a Split System Size Calculator Instead of an In-Home Assessment?
A split system size calculator is a useful first step. Energy.gov.au points homeowners to FairAir, the website run by the Australian Institute of Refrigeration, Air Conditioning and Heating (AIRAH), to get a better idea of the size of air conditioner they may need. Your Home suggests using that calculator or getting quotes from installers.
A calculator only knows the numbers you type in. It cannot see a wall of west-facing glass or a gap in the ceiling insulation. Daikin’s FAQ makes the same point from the manufacturer’s side: a specialist dealer assesses all the factors affecting the room’s indoor temperature before recommending a size. Use the calculator to get a rough figure, then have the room checked before you buy.
When Is a Multi-Head Split System or Ducted System a Better Fit?
Once you have sized one room, it is worth asking how many rooms you actually want to heat and cool. If the answer is two or more bedrooms plus the living area, separate single split systems mean a separate outdoor unit for each one.
A multi-head split system connects several indoor wall units to one outdoor unit, which saves space outside. Each indoor unit covers its own room and is controlled on its own, so you can cool a bedroom while someone else warms the lounge room. It suits homes that need several rooms covered but do not have the ceiling space for ducting.
If you want every room covered from one controller, with ceiling vents instead of wall units, a reverse cycle ducted system is the one to compare. Our article on reverse cycle ducted vs split systems sets out the differences, and the ducted sizing guide explains how a whole-home system is sized by heat load.
How Beyond Heating and Cooling Sizes a New Split System Installation
When you book a free home visit, our team walks through your home, measures each room you want covered and checks the ceiling heights, the insulation and the windows. From there, we recommend the split system size for each room and explain why, and you receive a quote with clear pricing.
Beyond Heating and Cooling holds an Australian Refrigeration Council (ARC) licence, and energy.gov.au notes that all air conditioner installers are required to be licensed through the ARC. We install Daikin as our preferred brand and also work with Mitsubishi Electric and Haier. Beyond Heating and Cooling is also a registered Victorian Energy Upgrades (VEU) provider, so if you are replacing gas heating, we confirm your rebate eligibility during the assessment and handle the paperwork.
You can see more about our split system installation in Melbourne, or request a free quote and tell us which rooms you want heated and cooled. You can also call us on 1800 239 663, Monday to Friday from 7:30am to 5pm.
Frequently Asked Questions About What Size Split System You Need
What size split system do I need for a bedroom?
Most bedrooms up to 20 square metres fall in Midea’s 2.0 to 2.5 kW band for small bedrooms and studies, based on a 2.4 metre ceiling. A larger main bedroom between 20 and 40 square metres falls in the 2.5 to 5.0 kW band. High ceilings, big windows or afternoon sun can push the size up.
What size air conditioner do I need for an open-plan living area?
Open-plan living areas between 40 and 60 square metres sit in Midea’s 5.0 to 9.0 kW band. Measure the whole open space, including the kitchen and dining area, because the split system has to heat and cool all of it. A very large or oddly shaped space may suit a multi-head or ducted system better.
How much bigger should a split system be for high ceilings?
Midea’s guide suggests a capacity roughly 10% larger for 2.7 metre ceilings and roughly 20% larger for 3 metre ceilings, compared with a standard 2.4 metre ceiling. Measure the ceiling height before you compare models, especially in a room with a raked ceiling.
Is it better to buy a bigger split system just in case?
No. The Australian Government’s Your Home guide says a system that is too large costs more to buy and wastes energy and money to run. An oversized split system also turns on and off too often, which can leave the room at uneven temperatures. The right size for the room is the better choice.
Is a split system size calculator accurate?
A calculator, such as the FairAir tool that energy.gov.au points to, gives you a useful rough figure. It relies on the measurements and details you enter, so it cannot see your windows or your insulation. An in-home assessment checks those details before you choose a split system.
Sources
- Midea Australia, Split System A/C: What Size Do You Need?, retrieved 2026-10-30, https://www.midea.com/au/blog/what-size-split-system-do-i-need
- Daikin Australia, How do I choose the right size air conditioner for my home?, retrieved 2026-10-30, https://www.daikin.com.au/faq/general/how-choose-right-home-air-conditioner-size
- Australian Government, Your Home: Heating and cooling, retrieved 2026-10-30, https://www.yourhome.gov.au/energy/heating-and-cooling
- Australian Government, energy.gov.au: Heating and cooling, retrieved 2026-10-30, https://www.energy.gov.au/households/heating-and-cooling
What Others Are Reading:
Our Services
Get In Touch
Contact us today for a free, no-obligation quote on your heating and cooling needs.
